When fabricating, selling and installing window treatments with bead or cord loops, a tension device is required in order to comply with the 2010 ANSI safety standards. Rowley Company has designed a simple, cost effective device that can be used for shades, traversing drapery or any other style driven by a bead or cord loop.
The Sure-Shade™ Universal Drive Tension Device is available in 7 colors, is easy to install and has a slim profile. It includes inside and outside mount brackets, cable tie, instructions and necessary screws. Stock #CT70/color
|Colors: DB=Dark Brown, N=Off White, P=Pecan, G=Grey, B=Beige, W=White, K=Black|
|The thickness is approximately 1/2 inch|
|The device is 3 inches long and is shown with the inside mount bracket attached. A wall mount bracket is also included.|
|Width of the device is 1 1/8 inches|
The device is attached to the bead or cord loop by the workroom or manufacturer. This is very simple to do, following these steps or you can watch a short video on our website.
Click here to view: Universal Drive Tension Device Video
|1. Pull back on the screw hole, this will lower the gripping teeth inside the devide. A paper clip can be inserted into the hole if you find this awkward to do.|
|2. While holding the tension, drop the bead chain loop into the end.|
|3. Slide the guide into the end with the smooth side next to the bead chain loop. Release the tension and let the guide snap in place.|
A Child Safety Warning Tag must be attached to each device (#ANS16) and is sold separately.